Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 223 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can
execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
LC Ethernet TCP-
Socket Local Port
Keep the default
value if necessary.
user with
Change
Configuration
permissions
LcEtPn
default: 6666
min: 1024
max: 65535
Used to select the local TCP
Protocol Port Number that
the Reader will listen on to
accept incoming TCP
connections from theLane
Controller.
LC Ethernet TCP-
Socket Timeout
(ms)
With at least one
RF Channel
configured to send
data to the LC via
Ethernet, type a
time in milliseconds
in field.
user with
Change
Configuration
permissions
LcEtTo
500
100-5000
Sets the timeout for a
response from the LC via
the LC Ethernet network.
To determine if there is an
Ethernet communication
problem between the
Reader and the LC.
LC Ethernet
Connection Mode
Select option in
connection mode.
user with
Change
Configuration
permissions
LcECnM
Standard
(Legacy)
Standard (Legacy)
TCP - Long Lived
Specifies how the Reader
will connect to the Lane
Controller. Select 'Standard
(Legacy)' for the traditional
'Open-Send-Close' TCP
Socket paradigm. Select