Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 216 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can
execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
communication
method enabled:
Select Disabled,
Report All, or
Report Non-Zero
mode.
Configuration
permissions
Report Non-Zero
Vote messages to the LC. A
CrossR report means an
adjacent reader has reported
the Vote message to a LC.
Disabled: Reader is not set to
communicate with other
Readers.
Report All results in all
transactions being sent to the
LC.
Align tag-
timeout expiry
between
readers
With Ethernet
communication
method enabled:
Toggle switch to
enable /disable.
user with
Change
Configuration
permissions
IR_TTO
1
0-1
This helps to align Tag
Timeout events between
readers to prevent missing
transactions due to TTO
expired on one reader but
not the other.
Inter-Reader
network timeout
(ms)
With Ethernet
communication
method enabled:
user with
Change
Configuration
permissions
IRIFTO
50
30-5000
Specifies the timeout in
milliseconds for Ethernet-
based inter-reader
communication. If this time is