Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 208 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can
execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
Dummy
Timeslot (CW)
Enable
With
Dummy_1/2/3/4
protocol selected,
for each channel,
select Dummy
checkbox to enable
CW.
user with
Change
Configuration
permissions
DUMTS1
DUMTS2
DUMTS3
DUMTS4
0
per channel
instance:
0-1
Specify the channel/slot firing
sequence for the Dummy_x
(CW) frame sequence
timeslot where ‘x’ is 1/2/3/4.
Tag Protocol Page: Dummy Advanced
Dummy Frame
Length
Enter frame length
in the field.
user with
Change
Configuration
permissions
DUMTSD
500
per dummy instance
(up to 4 instances):
500 - 32767
Specifies the duration of the
Dummy (CW) timeslot.
Note: When combined with
the Dummy Frame Length
Units parameter, below, the
(min, max) allowable Dummy
Frame Length when CW is
enabled is (500 µs, 200 ms)
Dummy Frame
Length Units
Select the required
multiple from drop-
down list.
user with
Change
DUMTSU
x1 µs (0)
per dummy instance
(up to 4 instances):
x1 µs (0)
Specifies the units to be used
when specifying the duration
of the Dummy timeslot.