Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 184 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
Agency ID
Enter a numeric
Agency ID.
user with Change
Configuration
permissions
AID___
0
0 - 127
Set the agency ID
which identifies the host
agency.
The agency ID will be written
into the TDM OBU read/write
memory as it goes through the
capture zone. This identifies the
last agency writing to the TDM
OBU.
Reader ID
Enter a numeric
Reader ID.
user with Change
Configuration
permissions
RID___
0
0 - 4095
Set the reader ID
which will be written to the
TDM OBU read/write memory
as it goes through the capture
zone, if Traffic Management or
Cross Reader Algorithm (Classic)
is enabled. Make sure a unique
Reader ID is used when there
are multiple readers at a plaza.