Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 183 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
Tag Protocol Page: TDM Tag Programming Panel
TDM Read-Only
Mode
Set Enable toggle
switch to ON to
enable write and
OFF for TDM Read-
Only Mode.
user with Change
Configuration
permissions
RDONLY
0
0-1
Controls whether the reader
writes or does not write to TDM
tags.
Group ID
Group ID
(cannot be
changed)
No one
RDRGID
0
0-255
Set the Group ID
Plaza ID
Enter a numeric
Plaza ID.
user with Change
Configuration
permissions
PID___
0
0-127
Set the Plaza ID
which will be written into the
TDM OBU read/write memory
as it goes through the capture
zone. Must be unique between
plaza installations when using
legacy TDM Cross Reader
Algorithm (CRA) between
adjacent readers.