Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 182 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
TDM Protocol
(select TDM protocol in Frame Sequence panel)
Command
How to execute
Who can execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
Tag Protocol Page: TDM Advanced Panel
RxR Autoread
Set toggle switch to
ON to enable
autoread.
user with Change
Configuration
permissions
RxRARD
0
0-1
When enabled, the reader
schedules 2 TDM reads back to
back instead of one, which
increases handshake counts.
This feature is only available for
the TDM protocol.
Suppress Non-
TDM Tags
Set toggle switch to
ON to suppress
non-TDM tags.
user with Change
Configuration
permissions
NONIAG
1
0 - 1
Used to suppress reporting of
non-IAG tags (i.e. tags whose
encoded group ID is not 65)
from being sent to the LC.
Disabled: All transactions are
reported
Enabled: Suppresses reporting
of OBUs not matching the TDM
protocol Group ID with which
the Reader is provisioned