Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 180 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
Time Slot enable
When a FDM
protocol (6B, 6C,
SeGo, ATA) is
selected from the
Frame Sequence,
set toggle switch to
ON in Time Slot
table column to
enable firing for
each channel.
For TDM /Title 21
protocol, see the
Channel Firing
Sequence panel in
below.
user with Change
Configuration
permissions
6C_TSC
SGOTSC
6B_TSC
ATATSC
0
0–1
For FDM protocol, specify the
tag protocol channel/slot firing
sequence.
Tag Protocol Page: Channel Firing Sequence Panel
(this panel expands Time Slot enable in above and will appear when TDM or Title 21 protocol is selected)