Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 178 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
Tag Protocol Page: Attenuation, Frequency and Time Slot Panel
Rx Attenuation
(dB)
Select a protocol
from the Frame
Sequence. For each
channel, input a
number in the Rx
Attenuation table
column.
user with Change
Configuration
permissions
TA6RX1
TA6RX3
FA6RX1
FA6RX2
FA6RX3
FA6RX4
5
0 - 31
Set the tag protocol receive
attenuation.
0 means maximum sensitivity.
Not applicable to Dummy and
Sync.
Tx Attenuation
(dB)
Select a protocol
from the Frame
Sequence. For each
channel, input a
number in the Tx
Attenuation table
column.
user with Change
Configuration
permissions
TA6TX1
TA6TX3
FA6TX1
FA6TX2
FA6TX3
FA6TX4
DA6TX1
0
0 - 31
Set the tag protocol transmit
attenuation.
0 means maximum sensitivity.
Not applicable to Sync.
Apply to Dummy as Dummy
(CW) transmit attenuation.