Operations and Maintenance Manual

MPR 4.1

Reader About This Manual

Confidential UM360479-100 Revision: Draft B4 Page 16 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

Conventions used in this manual

The following information is provided to the user to aid in understanding and readability.

Highlighting and callouts are used in the guide to indicate importance, or to indicate a change to the

user.

Example:

Bolding of words is used in the following cases:

• To indicate that an action is required (example: Click the Next button.)

• To indicate a main menu item and/or a menu option (example: From the Tag Protocol screen,

select the Enable TMP check box.

When required, tables listing screen fieldnames and/or column headings and their definitions or

meanings are placed below selected screens to aid in understanding technical terms.

Decision tables are used when procedures have more than one option from which to choose.

Example:

IF …

THEN …

you click the Login button and a dialog box

requesting a username and password appears,

go to step 5.

a 403 Forbidden error message appears,

ensure the IP address entered in the address bar is correct

and that the IP address is preceded by https://

Note: When you connect to the Reader with the laptop for

the first time accept the secure certificate before

continuing.

a web browser message indicating there is a

connection problem appears,

confirm that the IP address entered in step 3 is the correct

record of system IP addresses.

a security warning appears

follow the instructions the web browser provides.

The terms Tag, Transponder and On-board Unit or OBU are interchangeable in this manual.

The terms IAG and TDM are interchangeable in this manual when referring to screens or the TDM

protocol.

The terms Channel and Port are interchangeable in this manual