Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 174 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can
execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
Select Disabled or
Reader from the
Dynamic voting
control drop-down
list (LC Speed and
LC Ends are not
supported).
Configuration
permissions
LC Speed
LC End
Reader: the Reader monitors
the average time an OBU is in
the capture zone and uses
this time to determine an
appropriate voting time.
LC Speed: not currently
supported.
LC End: not currently
supported.
To set type of voting control.
Channels Page: Dynamic Voting Panel
(this panel will appear when Dynamic Voting Control is not in Disabled mode)
Dynamic Voting
Sample Size
With Dynamic
Voting Control for a
channel set to
Reader, enter the
desired number of
samples in field.
user with
Change
Configuration
permissions
DVSPSZ
20
1-50
Sets the sample size used in
the Dynamic Voting
Calculation.
To configure the Dynamic
Voting Control calculation.
The number entered here is
the number of previous
transactions used when