Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 173 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can
execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
handshakes are used in
comparing with adjacent
channels. Typically a value
other than 100 is used only
for channels that straddle
two physical lanes.
Group #
In Advanced mode:
Type the (voting)
Group ID for each
channel.
user with
Change
Configuration
permissions
RFGPID
0
0-7
By default all channels are in
one group, such that any
cross lane reads within the
group generate only one
transaction. By specifying
different (voting) group IDs,
multiple independent
capture zones can be
created. This is useful for
certain applications.
Dynamic Voting
Control
In Advanced mode:
user with
Change
DVCTRL
Disabled
Disabled
Reader
Disabled: no voting control