Operations and Maintenance Manual

MPR 4.1

Reader About This Manual

Confidential UM360479-100 Revision: Draft B4 Page 15 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

Cautions

Cautions indicate a risk of damage to equipment or loss of data.

CAUTION:

Caution description here.

The following cautions appear in the manual:

Improper modification of configuration parameters may adversely affect system operation.

The default values may not be appropriate for the specific application. It is the system

integrator’s responsibility to tailor the configuration parameters to the specific operating

environment.

Log file formats are not under ICD control and the format may change without prior

notification. Log files are for diagnostic purposes only and are not guaranteed to be

maintained in non-volatile storage.

Excessive bending or kinking can damage the RF feedline cables. Do not excessively bend or

kink the RF feedline cables when installing them between the antennas to the Reader

enclosure.

Activating inactive factory software/firmware on a running system is not recommended. The

factory software/firmware may not be appropriate for the specific application.

During software/firmware activation (typically less than 60 seconds), the Reader is unable to

process or report transactions.

The factory default configuration should not be restored on a running Reader. The factory

software/firmware may not be appropriate for the specific application. Save the current

Reader configuration before resetting the Reader configuration to the factory default.

Keep at least 100 centimeters away from the radiating face of the antenna when the antenna

port is connected and operating.