Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 167 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Command
How to execute
Who can
execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
Reader IP
Subnet Mask
Type the subnet
mask in the Reader
IP Subnet Mask
field.
user with
Change
Configuration
permissions
LETHNM
255.255.255.0:0
N/A
Initializes this field to a
subnet mask for sites that
utilize subnet addressing.
Required by sites that utilize
subnet addressing.
Default Gateway
IP
Type an IP address
in the Default
Gateway IP field
user with
Change
Configuration
permissions
Note: Initialize
this field to a
IPv4 address if IP
traffic needs to
be routed via a
gateway.
DFGWIP
0.0.0.0.0
N/A
Tells the Reader the default
gateway IP address of the
gateway device
Used to allow the Reader on
a network to connect to a
larger network (such as the
Internet) via a gateway
device (such as a router)
General Page: SNMP Panel