Operations and Maintenance Manual

_
MPR 4.1 Reader: Appendix
Confidential UM UM360479-100 Revision: Draft B4 Page 161 of 246
© Kapsch TrafficCom Canada Inc. 2022
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18
Kapsch TrafficCom
Appendix D Command and Controls
Table 7-1 lists and describes the commands and controls that can be deployed in the various Configuration screens that are available to a user.
Note 1: In the table, 0 = Disable, 1 = Enable
Note 2: Parameter name is the name of a parameter in the text configuration file that can be saved or loaded to reader, see Saving the Reader
configuration, page 127
Note 3: The parameters available in some screens, or the ability to change them, in some cases are dependent on enabling other settings in the
same screens first.
Note 4: The parameters available in some screens, or the ability to change them, in some cases are dependent on enabling settings in other
screens first.
Note 5: Dashboard page shows all the available web pages while menu Icon only shows short cuts to commonly accessed web pages.
Table 7-1: Commands and Controls
Command
How to execute
Who can
execute
Parameter
Name
Default Value
Parameter
Range
Purpose of command
Dashboard
Click Kapsch icon
on the top left
corner in banner to
go to Dashboard.
anyone
N/A
N/A
N/A
Displays the Dashboard in
the CTM web interface.
Used to show all available
web pages for accessing.