Operations and Maintenance Manual

MPR 4.1

Reader: Appendix

Confidential UM UM360479-100 Revision: Draft B4 Page 158 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL

(002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

Appendix C UI Reader Indicators

The User Interface can report the following problems at a glance:

Indicates a problem with one or more lane (zone) controllers

or the connections to those lane (zone) controllers.

Indicates problem with Reader to Reader Synchronization.

Indicates the reader's time offset while NTP is enabled is

higher than the configured maximum limit.

Indicates a problem with the reader Channel Group Controller

(CGC). The reader software automatically attempts to resolve

this issue.

Indicates a problem with the Reader frame sequence

configuration. For example, an empty frame sequence can

trigger this.

Indicates a problem connecting with adjacent readers via the

Inter-Reader (IR) network.

The reader CPU load is high (above 50%).

The reader CPU load is extreme (above 80%).

The browser UI can't communicate with the reader. Trouble

shoot: Check if the reader has been powered off.