Operations and Maintenance Manual

MPR 4.1

Reader Maintenance Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 133 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

7. From the Set Time screen, select Enable to enable the Reader time updates from an NTP server.

8. Enter the three unique IP addresses recorded in step 4 in the NTP Server 1, 2 and 3 text boxes.

9. Select the appropriate time zone from the Time Zone drop-down list. This is for display purposes only.

10. Click the Update NTP Setting button.

Result: The first available NTP server updates the Reader time.

Manually setting the Reader time and date

The Reader time can be set manually when it is not part of an Inter-Reader network. This procedure

outlines how to set manually the Reader time.

Prerequisites: Connect a service laptop to the Lane Controller Port to access the web interface.

Refer to Connecting a service laptop to the Reader, page 34.

1. Go to the Time web page.

Note: If Network Time Protocol is enabled, you will have to disable it to set the time manually.

Result: The following screen appears.