Operations and Maintenance Manual

MPR 4.1

Reader Maintenance Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 128 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

2. Click the Download reader configuratuin icon to save the new configuration.

Note: Different ways to save the configuration file appear depending on the web browser you

use.

Uploading a saved configuration

Uploading a saved configuration will overwrite the current Reader configuration. There are two

options for uploading a saved configuration: updating all configuration settings except for the IP

settings, or updating all configuration settings including the IP settings.

Prerequisites: A service laptop connected to the Reader LC port to access the web interface. Refer

to Connecting a service laptop to the Reader, page 34.

A version of the configuration file to be loaded is saved on the service laptop connected to the

Reader.

CAUTION:

Improper modification of configuration parameters may adversely

affect system operation. The default values may not be appropriate

for the specific application. It is the system integrator’s

responsibility to tailor the configuration parameters to the specific

operating environment.

1. Go to the Save / Load panel on the Configuration web page.

2. Click the Load a configuration file icon and select configuration file to be uploaded.