Operations and Maintenance Manual

MPR 4.1

Reader Maintenance Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 127 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

Prerequisites: You must have Manage Software permissions.

1. On the Reader Software web page, select the inactive software version to be deleted in the available

software version table.

2. Click the Delete icon .

3. Click Yes to confirm.

Result: The software will be deleted and will no longer appear in the software version table.

Configuration management

Saving the Reader configuration

Each Reader has a unique configuration file stored. This configuration file can be downloaded and

saved to a computer. Use a saved configuration file to do the following.

• Quickly configure another Reader requiring the same or similar configuration.

• Restore the Reader to a known configuration.

• Troubleshoot problems by comparing the current configuration to past configurations.

This procedure outlines the steps for saving the Reader configuration to a service laptop which is

logged into a Reader.

Prerequisites: Connect a service laptop connected to the Lane Controller port to accesses the web

interface. Refer to Connecting a service laptop to the Reader, page 34.

1. Go to Save/Load Configuration web page.

Result: The following screen appears.