Operations and Maintenance Manual

MPR 4.1

Reader Maintenance Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 125 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX 05/25/2022 11:18

Kapsch TrafficCom

Software Management

New software/firmware

Periodically, Kapsch Service will release a new version of the Reader software (and firmware) in a

single file. The software names indicate the year, month, day, and revision number of the release.

This procedure outlines how to upload the new software/firmware to the Reader so it can then be

activated.

Uploading new firmware

Prerequisites: Connect a service laptop containing a copy of the latest software/firmware to the

Lane controller port to access the web interface.

You must have Manage Software permissions.

1. Go to the Reader Software web page.

Result: The following screen appears.

Note: Ensure that the new software version is more recent than the active software version

2. Click the icon button

3. Select the new software file to be loaded.

4. Click Yes to confirm.