Operations and Maintenance Manual

MPR 4.1

Reader Maintenance Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 110 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX

05/25/2022 11:18

Kapsch TrafficCom

Prerequisites: Connect a service laptop to the Lane Controller port to access the web interface.

Refer to Connecting a service laptop to the Reader, page 34.

1. Go to the Channels web page.

2. Enter a percentage in the Port Weight field for each Port.

Result: The following screen appears.

Note: A Port weight of 100% means the full handshake count is considered at voting time, while

a Port weight of 50% means only half the handshake count is considered at voting time.

Figure 5-16: Wide ORT lanes with two straddle antennas