Operations and Maintenance Manual

MPR 4.1

Reader Maintenance Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 107 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX

05/25/2022 11:18

Kapsch TrafficCom

Configuring Voting Time

Manually setting a voting time gives a fixed voting time to each Port. Dynamic voting time allows the

Reader to calculate and base the voting time on the average capture zone span time (the average

time it takes for OBUs to pass through a capture zone).

Manually set the voting time for a Port

Prerequisites: Connect a service laptop to the Reader Lane Configuration port to access the web

interface. Refer to Connecting a service laptop to the Reader, page 34.

1. Go to the Channels web page.

Result: The following screen appears.

2. In the LPT/FME Voting Time field enter a voting time in milliseconds, to set the voting time for LPT and

FME OBUs.

3. In the Voting Time (all other tags) field enter a voting time in milliseconds, to set the voting time for all

OBUs that are not LPT or FME.

4. Click on the Group tab.

Result: The following screen appears.