Operations and Maintenance Manual

MPR 4.1

Reader Maintenance Instructions

Confidential UM UM360479-100 Revision: Draft B4 Page 104 of 246

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM360479-100 REV B4 DRAFT WIP MPR-4.1 READER OPERATIONS AND MAINTENANCE MANUAL (002).DOCX

05/25/2022 11:18

Kapsch TrafficCom

1. Select a set of unique IP addresses, one per reader for the IR Network.

2. Go to the Lane Assignment web page.

3. Select Ethernet for Inter-reader Communication Method.

Result: The following screen appears.

4. Set the Inter-Reader alias to the chosen ip address for the reader.

Note: The Inter-Reader alias applies to the whole Reader and is not for individual Ethernet port.

5. If there is a Reader on the left, set Left Reader toggle switch to ON. Thus for this example this must be

done on both Reader 2 and Reader 3 (reader 2 is left reader to Reader 3)

6. Enter the ip address of the left Reader in Left Inter-Reader alias field.

7. If there is a Reader on the right, set Right Reader toggle switch to ON. Thus for this example this must be

done on both Reader 1 and Reader 2 (reader 3 is right reader to Reader 2)

8. Enter the ip address of the right Reader in Right Inter-Reader alias field.