Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 91 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
OBU Visual Feedback
On the Toll Collection
Programming (TCP)
panel on the Tag
Protocol page:
With OBU feedback
enabled and Type 1
selected, select a
feedback option from
the OBU Visual Feedback
drop-down box.
User with
Change
Configuration
permission
OBUVIS
Off
Off
Green: 2s
Red: 2s
Yellow: 2s
Turns on and specifies the type of visual feedback an
OBU provides.
To configure how long and what color an OBU LED
flashes to indicate a successful transaction.
Valid Tag: Audible
On the Toll Collection
Programming (TCP)
panel on the Tag
Protocol page:
With OBU Feedback
enabled, and Type 2
selected, select a
feedback option from
the OBU Audible
Feedback drop-down
box.
User with
Change
Configuration
permission
O2VLDA
Off
Off
4 cycles: 0.25s ON,
0.25s OFF
1 cycle: 1.5s ON
3 cycles: 0.5s ON,
0.2s OFF
Specifies the audible feedback to provide for a valid
tag.
To configure how long and how many times an OBU
beeps to indicate a successful transaction.
OBU feedback type 2 parameters only apply to TDM
tags if a status file has been transferred to the
Reader.