Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 89 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
RW Format
On the Toll Collection
Programming (TCP)
panel on the Tag
Protocol page:
With TCP enabled, select
the TC RW Format
switch.
User with
Change
Configuration
permission
rw__RW
0
0-1
Disabled: RW Format not affected.
Enabled: Reader controls how OBU scratchpad
memory is encoded.
Determines how the data stored in OBU scratchpad
memory is encoded.
Lane Number
(enable)
On the Toll Collection
Programming (TCP)
panel on the Tag
Protocol page:
With TCP enabled, select
the TC Lane Number
switch.
User with
Change
Configuration
permission
rwLANE
1
0-1
Enables lane number programming.
To enable ability to set a specific lane number for
each RF channel.
HOT (High
Occupancy Toll) lane
On the Toll Collection
Programming (TCP)
panel on the Tag
Protocol page:
With TCP enabled, select
the HOT (High
Occupancy Toll) Lane
switch ON, then, select
the desired lane check
box.
User with
Change
Configuration
permission
HOT_LN
0
0 - 1
Enable HOT lane programming in a specific lane.
0 = disabled
1 = enabled