Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 86 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
TM Date/Time
On the Traffic
Management
Programming (TMP)
panel on the Tag
Protocol page:
Either enable or disable
the TMP switch.
User with
Change
Configuration
permission
rwTMDT
1
0-1
Determines whether or not to program the TM-
DATA date/time fields of the tag's R/W area
Disabled: the Reader date and time is not written to
OBUs
Enabled: the Reader date and time is written to
OBUs
to keep a record in OBUs of the TM transaction time
Enable TCP
On the Toll Collection
Programming (TCP)
panel on the Tag
Protocol page:
Select the Enable TCP
switch ON position.
User with
Change
Configuration
permission
TCP___
1
0-1
Disabled: Reader is not permitted to update toll
collection fields in OBUs.
Enabled: Reader is permitted to update toll
collection fields in OBUs.
To control if toll collection fields can be written to
OBUs and to access TCP settings in the Tag
Programming tab.
R/W Enable Plaza ID
On the Toll Collection
Programming (TCP)
panel on the Tag
Protocol page:
With TCP enabled, select
the Plaza ID switch.
User with
Change
Configuration
permission
rw_PZID
N/A
N/A
Enables Plaza ID to be written to OBUs.
To write Plaza ID to OBUs and access the Plaza ID
field.