Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 83 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
6C Custom Mask
Select
On the 6C Programming
panel on the Tag
Protocol page
Select 6C custom mask
from the drop-down list.
User with
Change
Configuration
permission
6CCMSK
None (0)
None (0)
TOC V2.1 (or later)
(1)
TOC V2.0 (WSDOT)
(2)
Legacy WSDOT (3)
TOC V0.7-V1.0
(E470) (4)
TOC V0.7-V1.0 (TI
Corp.) (5)
Legacy SRTA (6)
Specify what custom tag matching option to use
when reading 6C tags.
6C Sub-Mask Enable
On the 6C Programming
panel on the Tag
Protocol page
When TOC V2.1 or TOC
V2.0 are selected,
checkbox will be shown
in Agency Sub-Mask.
Select checkbox to
enable.
User with
Change
Configuration
permission
6C_SME
Off (0)
Off (0) –
Agency 1
(0x00000001) |
Agency 2
(0x00000002) |
Agency 3
(0x00000004)
Specify whether or not a Sub Mask is to be enabled
for the selected 6C Custom Mask.