Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 80 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
Tag Protocol Page
Suppress Non-IAG
Tags
On the TDM Advanced
panel of the Tag Protocol
page:
Select Suppress Non-IAG
Tags
User with
Change
Configuration
permission
NONIAG
1
0 - 1
Disabled: All TDM transactions are reported
Enabled: Suppresses reporting of TDM OBUs not
matching the IAG Group ID with which the Reader is
provisioned
Used to prevent incompatible report formats from
being sent to the LC
RxR Autoread
On the TDM Advanced
panel of the Tag Protocol
page:
Select RxR switch.
User with
Change
Configuration
permission
RxRARD
0
0-1
Specifies the TDM transactions as either RPV or RxR
format.
Lane Number
On the TDM Tag
Programming panel on
the Tag Protocol page,
with TDM Tag
Programming enabled,
enter a value from 0 to
31 in each channel
number field.
User with
Change
Configuration
permission
RFLNUM
Per-instance
defaults.
Instance:0
value:1
instance:1
value:2
.
.
.
instance:30
value:31
0-31
Assigns a lane number to each channel. ATTENTION:
this field should be used with care as the value may
not reflect the channel on which the tag was
reported.
To indicate in OBU data which lane an OBU was in
when a transaction occurred.