Operations and Maintenance Manual

JANUS

Multi-Protocol Reader 2.4 Operating Instructions

Confidential UM 360467-110 Revision: B Page 73 of 247

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01

Kapsch TrafficCom

Commands and controls

Table 3-7 lists and describes the commands and controls that can be deployed in the various Configuration screens that are available to a user.

• Note1: In the table, 0 = Disable, 1 = Enable

• Note2: Prmtr Name is the parameter name in the text configuration file that can be saved or loaded to reader, see Saving the Reader

configuration, page 212

• Note3 The parameters available in some screens, or the ability to change them, in some cases are dependent on enabling other settings in the

same screens first.

Table 3-7: Commands and Controls

Command

How to execute

Who can

execute

Prmtr.

Name

Default Value

Prmtr.

Range

Purpose of command

The banner menu refers to the icon shown in the top banner. This is present on every page.

If you see the symbol in the banner, you can view but not change reader settings. This is due to an acccount permission setting.

Dashboard

In the Main menu:

Click Dashboard

Shortcut: Click on the

top left Kapsch logo in

the banner.

Anyone

N/A

Return to the reader web interface home page

(Dashboard).