Operations and Maintenance Manual

JANUS

Multi-Protocol Reader 2.4 Operating Instructions

Confidential UM 360467-110 Revision: B Page 57 of 247

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01

Kapsch TrafficCom

sensitivity (Rx Attn) settings will be applied as a baseline to all channels for that particular protocol, which can be

adjusted individually after the wizard exits.

The next wizard page asks for the number of antennas. This is used to reduce the number of settings shown on

various web pages. For example selecting 5 antennas will set up the reader for a 5 channel scan, and will hide web

interface settings for channels 6, 7, 8. Note: This setting can be adjusted after the wizard exits.

On the next wizard page, select the lane controller Interface type.

On the next wizard page, the time setting method can be specified.