Operations and Maintenance Manual

JANUS

Multi-Protocol Reader 2.4 Operating Instructions

Confidential UM 360467-110 Revision: B Page 53 of 247

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01

Kapsch TrafficCom

Lane Control

Configures the lane controller endpoints (destinations) and which reader events are reported. By

default only the Vote report is generated.

Time

Set the reader time manually or via NTP.

Save/Load

Allows reader configuration to be saved, loaded or reset to defaults.