Operations and Maintenance Manual

JANUS

Multi-Protocol Reader 2.4 Operating Instructions

Confidential UM 360467-110 Revision: B Page 51 of 247

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01

Kapsch TrafficCom

Transaction Buffering

The reader buffers tag reports in its memory when a lane controller connection is down. The Transaction

buffering section of the Status page shows how many reports are buffered for each channel. The following

screen shows an example.

Configuring the Reader

Prerequisites: Connecting a service laptop to the Reader, page 42.

View or modify reader configuration settings from the Dashboard page, using the buttons in the Configure panel

(sample shown below).

A list of settings available and their function is provided in Commands and controls, see page 73.

Each configuration button links to a configuration page listed in Table 3-5. It is recommended that the following

configuration pages be reviewed:

• Time

• General

• Channels (“tag timeout” parameter is on this page)

• Tag Protocol

• Lane Controller

• Lane Assignment

The icon at the top of any reader web page, indicates the current user account has read-only access to the

configuration settings. In this mode, the user can view but is not able to change configuration settings.