Operations and Maintenance Manual

JANUS

Multi-Protocol Reader 2.4 Operating Instructions

Confidential UM 360467-110 Revision: B Page 50 of 247

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01

Kapsch TrafficCom

Reader Status panel

Field

Status

Description

Other Side CTM Presence

Is the other side of the CTM present or absent in the chassis.

Other Side Config

Compare

Communication Down (peer CTM is not running so

configuration state is unknown)

Same (peer CTM configuration is identical to this CTM’s

configuration)

Different (peer CTM configuration is different that this CTM’s

configuration)

Front-panel switch

position

Auto; Primary; Secondary

Auto, Primary (switch set to Primary side), Secondary (switch

set to Secondary side).

For a redundant system, the switch would normally be set to

Auto

CFM Status

Present

Indicates normal status

Not Detected

Indicates a problem; call Kapsch Service

Frame Seq. Config.

Indicates whether or not the last attempted frame sequence

configuration contains errors. If an error is indicated, review

the Tag Protocol configuration, and review the event/trouble

logs for more detailed information.

Super Frame Time (μs)

Reader timing information (frame sequence length) In

microseconds

CPU Load

High (above 50%)

Extreme (above 80%)

Uptime

Number of seconds since power up.