Operations and Maintenance Manual

JANUS

Multi-Protocol Reader 2.4 Operating Instructions

Confidential UM 360467-110 Revision: B Page 45 of 247

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01

Kapsch TrafficCom

Changing your password

You can change your web account password with this procedure.

Prerequisites: Accessing the Reader web interface, page 42.

1. From the reader dashboard, select the Users page.

Select your user name from the user table and select Change Password ( ) icon

Enter your new password in the Password and retype password fields.

Click the SAVE button.

Result: Your password is now changed. Repeat on the secondary side.

Resetting a forgotten password

If a user forgets their password, the password can be cleared by another user with Admin User permissions.

This procedure requires two users; a user with Admin User permissions and the user requiring a reset password.

Prerequisites: The user clearing the password must have Admin User permissions.

1. Have an admin user log in and navigate to the Users page.

2. Select a user listed in the table whose password is to to reset.

Click the corresponding Reset Password ( ) button and then YES to confirm.

Result: The locked out user’s password is reset to “password”

Log out (see Logging out of the web interface, page 44).

Have the locked out user try to log in, now with a password of “password”.

Immediately change your password (see Changing your password, page 45).

Checking Reader Status

You can monitor and gather information about the Reader from the web interface. From the reader home page,

click on the Status to get to the status page. The Status page displays the state of the communication links, the

power supply modules, and the CTM/CGC, and is useful for troubleshooting the Reader. The Status page is

divided into a number of panels.

Communications Status

The first panel indicates the Communication status.