Operations and Maintenance Manual

JANUS

Multi-Protocol Reader 2.4 Operating Instructions

Confidential UM 360467-110 Revision: B Page 28 of 247

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01

Kapsch TrafficCom

Smart Multi-protocol RF Module Plus (MRFM-S Plus)

Function

Executes frame functions triggered by command

or configuration messages and timing signals

received from the CTM via the DSM.

Executes the over-air aspects for a protocol

within each frame, generating the analog RF

signal that is sent to the OBU via the antenna.

Receives the analog RF signal collected from the

OBU via the antenna and recovers the data

content from the over-air protocol messages.

Reports the recovered data and status

information as messages that are sent to the CTM

via the DSM.

Output Power = 36dBm + 0.6dBm

Units per Reader

One MRFM-S Plus for each antenna. A maximum

of 8 MRFM-S Plus per Reader.

Redundant

Normal State

The DATA LED  illuminates solid green when

RF is being transmitted.

Connections

The MRFM-S Plus module supports mono static

output configurations.

Only connections  is connected by an RF cable

to the antenna.



