Operations and Maintenance Manual

JANUS

Multi-Protocol Reader 2.4: Appendix

Confidential UM 360467-110 Revision: B Page 246 of 247

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01

Kapsch TrafficCom

Appendix D Non-redundant reader

The non-redundant Reader consists of:

Note: Numbers in the list below refer to those associated with the illustration below. The DSM, and

CFM are not shown.

• One rack and Distribution Module

• MRFM-S modules (up to 4 modules can be installed)

• One Power Supply Module (PSM) and AC Power Cord 

• One Lane Port Modules (LPM) 

• One Controller Module (CTM),  equipped with one Main Controller (MC), one

Channel Group Controller (CGC)

• One Configuration Module (CFM) that attach directly to the DSM (not shown)

• One Synchronization Port Module (SPM) 

The following illustration shows the non-redundant reader setup with the right hand configuration. A left hand

configuration is also available.