Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Appendix
Confidential UM 360467-110 Revision: B Page 243 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Appendix B FCC Approved Channel Frequencies
and Selection
The frequency plan used at a toll site is dependent on the antenna spacing rules, local RF interferers and the
approved FCC (or other applicable regulatory body) frequencies.
RF Module FCC ID JQU 802295A and also RF Module with Amplifier FCC ID JQU 802295A-A are approved for
30W ERP radiated power by the FCC for the following protocols.
JQU802295A and JQU 802295A-A – FCC Approved Frequencies
FDM Protocols
902-904 MHz Sub-Band
909.75-921.75 MHz Sub-Band
ATA
902.5-903.5
910-921.5
6B
n/a
911-920.5
SeGo
n/a
911.5-919.5
6C
903
910.5-920.5
TDM/mixed Protocols
TDM
n/a
915.75
JQU802870 – FCC Approved Frequencies
FDM Protocols
902-904 MHz Sub-Band
909.75-921.75 MHz Sub-Band
ATA
902.5-903.5
910-921.5
6B
903
910.5-920.5
SeGo
n/a
911-920
6C
903
910.5-920.5
TDM/mixed Protocols
TDM
n/a
915.75