Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Appendix
Confidential UM 360467-110 Revision: B Page 242 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Feature
JANUS
Badger
Notes
Event log
Y
Y
MPR2.4 50 MB; BGR & IAG: 10 events
Other
Network Time Protocol
Y
Allows NTP to sync date and time for all Readers in
a network
Feedback OBU activation – Option 1
Y
Y
BGR205 firmware
Dual Reporting Mode (Redundancy Reporting)
Y
Improved processing redundancy handling (JANUS
Reader Phase 2).
HARDWARE
The JANUS non-redundant Reader uses the
secondary side components. The JANUS
non-redundant MPR 2.4 reader uses the
primary side components.
Y
The Badger non-redundant Reader uses the
primary side components
The JANUS non-redundant Reader software is
locked in Secondary mode; the mode switch
mechanical position is ignored. The JANUS non-
redundant MPR 2.4 reader software is locked in
Primary mode; the mode switch mechanical
position is ignored.
Y
The Badger non-redundant Reader mode switch is
mechanically locked in the “primary” position.