Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Appendix
Confidential UM 360467-110 Revision: B Page 241 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Feature
JANUS
Badger
Notes
Post capture zone report
Y
Transaction buffering
Y
Y
JANUS: 1 million non-volatile BGR: 80K IAG: 1K
Reset transaction number
Y
Accept a Lane Controller command to reset OBU
transaction number to zero
Latency measurement & reporting
Y
Status File Download for Feedback OBUs
Y
up to 40 million OBUs in the file
Feedback OBU support
Y
Beeper and LED on OBU supported
Maintenance Features
Web interface for local/remote Reader HTTPS
access and control
Y
Viewing/modify Reader configuration, view status,
download/run software, manage OBU Status file
Real time reporting of transactions on web
interface
Y
Multiple users & permissions per user
Y
Zero re-configuration upon processor module
(CTM) replacement
Y
When a CTM is swapped, Reader configuration
parameters are retained in the CFM (a non-volatile
memory off board from the CTM).
Save Reader Configuration File to laptop (also IP
addresses and permissions passwords)
Y
Transition process is made easier. During service
process, reload the original instead of manual
setting many parameters.
Remote reset (reboot)
Y
reset via a lane controller or the web interface
Software/Firmware download
Y
Maintain multiple software/firmware images
Y
At least 6 versions, including factory image.
Automatic switchover recovery
Y
Reader will return control to Primary without
operator intervention.
Copy reader logs to USB stick
Y
Diagnostics
Diagnostic Port
Y
Y
Load monitoring (CPU/Mem)
Y
Allows anomaly detection.
High Speed Margin Diagnostic
Y
Proof of concept
Trouble Log
Y
Transaction Log
Y
Temporary transaction log