Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Appendix
Confidential UM 360467-110 Revision: B Page 240 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Feature
JANUS
Badger
Notes
Early read voting delay
Y
Handshaking is continued for a longer period of
time to include both sides of any gap in reading
individual tags
Low read voting delay
Y
Adjacent channel programming
Y
Look for tags on adjacent channels
Y
Improve read performance
Implied Channel Groups
Y
global voting time (BGR), TTO
Configurable channel groups
Y
separate voting time, TTO, etc per group
Interleaved programming mode
Y
Y
Non-interleaved programming mode
Y
Read/Write Operation
Y
Y
Compatible handshake performance.
Improvement of Write performance
Y
Continue write attempts after voting ends
No tag programming on a Guard channel
Y
Y
Dual read per frame
Y
Performance improvement
Tx/Rx Attenuation Control
Y
Power on each antenna is configurable
Lane Controller & Reporting Features
Filter out Non-IAG tags
Y
Non-IAG tags are not reported – configurable
feature
Lane Assignment
Y
Y
Compatible performance (capture rate, read/write
operation)
Support 8 LC Serial ports
Y
Y
Max Serial port speed (kbps)
115.2
57.6
BGR max is on 5 ports
Support LC Ethernet interface
Y
Support Inter-Reader Ethernet interface
Y
Handshaking with Adjacent Readers
Y
Adjacent Readers are included in voting. Also,
conflicts in configurations of adjacent Readers are
identified.
Host Port support
Y
Re-Report
Y
re-report a tag in zone
Initial Read Report
Y