Operations and Maintenance Manual

JANUS

Multi-Protocol Reader 2.4 About This Manual

Confidential UM 360467-110 Revision: B Page 20 of 247

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01

Kapsch TrafficCom

Example:

IF …

THEN …

you click the Login button and a dialog box

requesting a username and password

appears,

go to step 4

a 403 Forbidden error message appears,

ensure the IP address entered in the address bar is

correct and that the IP address is preceded by https://

Note: When you connect to the Reader with the laptop

for the first time accept the secure certificate before

continuing.

a web browser message indicating there is a

connection problem appears,

confirm that the IP address entered in step 3 is the

correct record of system IP addresses.

a security warning appears

follow the instructions the web browser provides.

The terms Tag, Transponder and On-board Unit or OBU are interchangeable in this manual.

The terms IAG or TDM are interchangeable in this manual when referring to screens or the TDM protocol.

How to use this manual

The JANUS

Multi-Protocol Reader 2.4 Operations and Maintenance Manual requires no special instructions on

how to use it.

Topics can be found in the Table of Contents at the beginning of the manual to help with navigation.

If an online version of the guide is used, both the Table of Contents topics, and page and subject cross-

references within the body of the document are hyperlinked to their asociated subject matter.