Operations and Maintenance Manual

JANUS

Multi-Protocol Reader 2.4 Maintenance Instructions

Confidential UM 360467-110 Revision: B Page 215 of 247

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01

Kapsch TrafficCom

Adjust the permission attributes via the toggle switches and click SAVE.

Result: The user access permissions are updated.

Deleting a user

Use this procedure to remove a user’s access to the reader web interface.

1. From the home page, click the Users button on the Manage panel.

Select the row containing the user to be removed.

Click the Delete button.

Click Yes to confirm.

Result: The user account is removed and can no longer log in to the reader web interface.

Verifying which CTM a web session is interacting with

This operation helps when dealing with multiple readers in a cabinet, by flashing the MC indicator on the reader

front panel indicator for a few seconds. This can help identify which CTM is being addressed by the web

interface.

Prerequisites: Accessing the Reader web interface, page 42.

1. From the home page, click on the Identify button.

2. After the confirmfation, examine the MC indicator of the CTM and confirm it flashes between Red / Amber

/ Green for a few seconds.

Network Time Protocol

NTP time sync can be used when a single reader is in use, as well as multiple readers, to align time with a NTP

server.

Enabling NTP

Prerequisites: The Reader must be on a network that has access to an integrator supplied NTP time server(s).

The IPv4 address of the NTP server(s) must be known. Accessing the Reader web interface, page 42. You must

have Change Configuration permission.