Operations and Maintenance Manual

JANUS

Multi-Protocol Reader 2.4 Maintenance Instructions

Confidential UM 360467-110 Revision: B Page 213 of 247

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01

Kapsch TrafficCom

CAUTION:

Improper modification of configuration parameters may adversely

affect system operation. It is the system integrator’s responsibility

to load configuration parameters relevant to the specific operating

environment.

1. From the Save / Load page, click the button to locate a previoulsy saved configuration file.

2. In the confirmation dialog click "Yes" load the configuration settings from the file.

3. Settings are applied immediately. A reboot is not required.

Resetting the Reader configuration to the factory default

Certain field service tests use the factory default configuration. This procedure outlines how to restore the

factory default settings.

CAUTION:

The factory default configuration should not be restored on a

running Reader. Save the current Reader configuration before

resetting the Reader configuration to the factory default, in

case you want to recover previous settings.

1. Click on the Save / Load button on the Configure panel of the reader home page.

Click the Reset Parameters to Default Values button.

Result: All configuration values, except for the Reader network settings, site name, and user account settings,

revert to the factory defaults. A reboot is not required.

User Administration

User administration permissions are needed when a new user account needs to be created, when an account

needs to be changed, or deleted. The user can be given any combination of the following permission attributes:

• Admin User

• Manage Software (permission to update / change running version of reader software)

• Manage Logs (permission to download or delete logs)

• Change Configuration (permission to change reader settings)

Prerequisites: Accessing the Reader web interface, page 42. Admin User permissions.