Operations and Maintenance Manual

JANUS

Multi-Protocol Reader 2.4 Maintenance Instructions

Confidential UM 360467-110 Revision: B Page 212 of 247

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01

Kapsch TrafficCom

1. From the Other Available Software Versions section of the Reader Software page, select a version to

be deleted.

Click the Delete button.

Click Yes to confirm.

Result: The software will be deleted and will no longer appear in the software version table.

Configuration management

Prerequisites: Accessing the Reader web interface, page 42. Change Configuration permission. If the

symbol is shown in the banner, you can view but not change the reader configuration.

Saving the Reader configuration

The current reader configuration can be saved to a text file, which can be useful for the following situations:

• Quickly configure another Reader requiring the same or similar configuration.

• Restore the Reader to a known configuration.

• Troubleshoot problems by comparing the current configuration to past configurations.

1. From the home page, click the Save/Load button from the Configure panel.

Click the Download reader configuration button to save the current configuration. The browser should offer to

download, or automatically download (depending on browser settings) the reader configuration file to the laptop.

Result: The reader configuration file is saved to your laptop (typically the Downloads folder).

Loading a reader configuration file

Uploading a previoulsy saved configuration overwrites the current reader configuration. Some parameters

(reader network settings, site name, and user account settings) are not modified. Only load a configuration file

saved from the same model of JANUS reader.