Operations and Maintenance Manual

JANUS

Multi-Protocol Reader 2.4 About This Manual

Confidential UM 360467-110 Revision: B Page 19 of 247

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01

Kapsch TrafficCom

mode switch on the SPM module. Ensure that the other side is running normally and all lane

controller links are functioning. The Reader will be unable to process or report transactions if

it is unable to switch over to the other side.

During software/firmware activation (typically less than 60 seconds), a non-redundant Reader

is unable to process or report transactions.

The factory default configuration should not be restored on a running Reader. The factory

software/firmware may not be appropriate for the specific application. Save the current

Reader configuration before resetting the Reader configuration to the factory default.

Keep at least 100 cm away from the radiating face of the antenna when the RF module is

connected and operating.

New Features

The following symbol indicates a new feature for the MPR 2.4 reader.

Conventions used in this manual

The following information is provided to the user to aid in understanding and readability.

Highlighting and callouts are used in the guide to indicate importance, or to indicate a change to the user.

Example:

Bolding of words is used in the following cases:

• To indicate that an action is required (example: Click the Next button.)

• To indicate a main menu item and/or a menu option (example: Select a feedback option from the

OBU Audible Feedback drop-down box.

When required, tables listing screen fieldnames and/or column headings and their definitions or meanings are

placed below selected screens to aid in understanding technical terms.

Decision tables are used when procedures have more than one option from which to choose.