Operations and Maintenance Manual

JANUS

Multi-Protocol Reader 2.4 About This Manual

Confidential UM 360467-110 Revision: B Page 17 of 247

All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.

FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01

Kapsch TrafficCom

WARNING:

WARNING DESCRIPTION HERE.

The following warnings appear in the manual:

AN IMPROPERLY GROUNDED READER COULD RESULT IN ELECTRIC

SHOCK. ENSURE A HIGH CURRENT EARTH GROUND CONNECTION IS

ESTABLISHED BEFORE CONNECTING SUPPLY POWER TO THE READER.

THE MODULES MAY HAVE SHARP EDGES. HANDLE THE MODULES

CAREFULLY. WHENEVER POSSIBLE, USE A MODULE EXTRACTION TOOL

TO REMOVE A MODULE.

THE MRFM-S or MRFM-S Plus MAY BECOME HOT UNDER NORMAL

OPERATING CONDITIONS. ENSURE THE MRFM-S HAS COOLED DOWN

OR WEAR GLOVES WHEN HANDLING THE MRFM-S or MRFM-S Plus.

THE PSM MAY BECOME HOT UNDER NORMAL OPERATING

CONDITIONS. ENSURE THE PSM HAS COOLED DOWN OR WEAR

GLOVES WHEN HANDLING THE PSM.

EXPOSED HIGH VOLTAGE IS PRESENT IN THE PSM. ENSURE THAT THE

POWER SWITCH IS SET TO THE OFF POSITION AND THAT THE AC

INPUT POWER CORD IS DISCONNECTED BEFORE REMOVING THE PSM.

INSTALLING A FUSE OF THE WRONG TYPE OR RATING MAY CAUSE A

FIRE. ENSURE A TIME-LAG FUSE RATED FOR 10A, 250VAC IS

INSTALLED.