Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 133 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
Reset Config
On the Save/Load
Configuration page:
Click the Reset reader
configuration to defaults
icon to reset.
User with
Change
Configuration
permission
N/A
N/A
N/A
Restore all Reader configuration settings to the
factory default values except for the reader
network settings (see General page) and site
name.
Reader Software Page
Upload File
On the Reader Software
page:
Click the Load icon and
select a file to upload.
User with
Manage
Software
permission
N/A
N/A
N/A
Upload a software/firmware version to the Reader
so that it can be activated later.
Activate Software
Version
On the Reader Software
page:
Select version in the list
of Available Software
Versions, then click the
Activate icon.
User with
Manage
Software
permission
N/A
N/A
N/A
Activate the selected software/firmware version.
This will also deactivate the currently running
software/firmware version.