Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 126 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
Voting Delay Gap
Scaling Factor (%)
On the TDM Low Read
Logic panel on the Lane
Assignment page,
Enter value in Voting
Delay Gap Scaling Factor
field
User with
Change
Configuration
permission
LRDVSF
100
0 - 500
Specifies the voting delay scaling factor to apply
Channels Page
RF Channel Number
On the Channels panel
on the Channels page:
Enter a value in the
Number of Channels
field.
User with
Change
Configuration
permission
N/A
N/A
1-8
Enter a value from 1 to 8
RF State
On the Channels panel of
the Channels page:
Select one of the choices
offered from the drop
down menu for every
appropriate channel.
User with
Change
Configuration
permission
RF_STS
Offline
Offline
Active
Guard
No Module
Offline means the MRFM-S module is off.
Active means the MRFM-S module is on and reports
transactions on this channel.
Guard means MRFM-S module is on, but
transactions assigned to this channel are not
reported.
No Module Intentionally indicates an empty slot in
the RF rack for this channel. This will prevent false
module status errors.
Active or Guard status is applied to all protocols.