Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 123 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
Right Reader IP
From the Inter-Reader
panel on the Lane
Assignment page, with
Ethernet communication
method enabled, with
the Right Reader
enabled,
Enter the IP address of
the right Reader in the
Right Inter-Reader alias
field.
User with
Change
Configuration
permission
RGHTIP
0.0.0.0
N/A
Informs the Reader what the IP address is of the
Reader covering lanes to the right of this Reader.
To provide the Reader with the IP address of the
right Reader in the IR network
Inter-Reader alias
From the Inter-Reader
panel on the Lane
Assignment page:
With Ethernet
communication method
enabled:
Enter IP address of this
Reader in field.
User with
Change
Configuration
permission
READIP
192.168.0.151
N/A
Assign a unique IPv4 address to the reader as a
whole. This address is used for inter-reader
communication (e.g. inter reader voting). If there is
only one reader at a site, this can be set to 0.0.0.0