Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 122 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
Enable Left Reader
From the Inter-Reader
panel on the Lane
Assignment page, with
Ethernet communication
method enabled:
Select the Left Reader
switch.
User with
Change
Configuration
permission
LEFTRD
0
0-1
Disabled: Reader does not coordinate voting with
Reader covering lanes to the left.
Enabled: Reader coordinated lane assignment voting
with Reader covering lanes to the left.
Tells this Reader if there is another Reader in the IR
network that is covering ORT lanes that are to the
left of the lanes this Reader is covering.
Left Reader IP
From the Inter-Reader
panel on the Lane
Assignment page, with
Ethernet communication
method enabled, with
the Left Reader enabled,
Enter the IP address of
the left Reader in the
Left Inter-Reader alias
field.
User with
Change
Configuration
permission
LEFTIP
0.0.0.0
N/A
Informs the Reader what the IP address is of the
Reader covering lanes to the left of this Reader.
To provide the Reader with the IP address of the left
Reader in the IR network.
Enable Right Reader
From the Inter-Reader
panel on the Lane
Assignment page, with
Ethernet communication
method enabled:
Select the Right Reader
switch.
User with
Change
Configuration
permission
RGHTRD
0
0-1
Disabled: Reader does not coordinate voting with
Reader covering lanes to the right.
Enabled: Reader coordinated lane assignment voting
with Reader covering lanes to the right.
Tells this Reader if there is another Reader in the IR
network that is covering ORT lanes that are to the
right of the lanes this Reader is covering.