Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader 2.4 Operating Instructions
Confidential UM 360467-110 Revision: B Page 121 of 247
© Kapsch TrafficCom Canada Inc. 2021
All information contained herein is proprietary to, and may only be used with express, written permission from, Kapsch TrafficCom Canada Inc.
FILE: UM 360467-110 REV B3 MPR 2.4 CLEAN.DOCX 03/02/2021 1:01
Kapsch TrafficCom
Command
How to execute
Who can
execute
Prmtr.
Name
Default Value
Prmtr.
Range
Purpose of command
Cross-Reader
Reporting
From the Inter-Reader
panel on the Lane
Assignment page, with
Legacy CRA or Ethernet
communication method
enabled:
Select Disabled, Report
All, or Report Non-Zero
from the Cross-Reader
Reporting box.
User with
Change
Configuration
permission
CRARPT
0
0
Report All
Report Non-Zero
Disabled: Reader is not set to communicate with
other Readers.
Report All results in all transactions being sent to the
LC
Report Non-Zero informs the LC of suppressed
transactions
To set which transactions are sent to LC in multi-
reader configurations
Align tag-timeout
expiry between
readers
From the Inter-Reader
panel on the Lane
Assignment page:
With Ethernet
communication method
enabled:
Toggle switch to enable
/disable.
User with
Change
Configuration
permission
IR_TTO
1
0-1
This helps to align Tag Timeout events between
readers to prevent missing transactions due to TTO
expired on one reader but not the other.
IRIF Timeout [ms]
(make sure the TTO
values of all IRIF
readers are the
same)
From the Inter-Reader
panel on the Lane
Assignment page, with
Ethernet communication
method enabled:
Enter a time, in
milliseconds, in the IRIF
Timeout field.
User with
Change
Configuration
permission
IRIFTO
50
30-5000
Sets IRIF timeout time
Sets the threshold for determining an IR network
problem and enable a switchover if enabled